Product Types
Brands
 |
 |
 |
 |
 |
 |
All Products From: Pelletron
Positive Pressure Conveying - Overview
With a vacuum conveying system the product is mixed with the air down-stream of the blower, the product is then removed from the air stream using filtration or a cyclone at the point of delivery, the filtered air then enters the blower. So the conveying is done on the negative pressure or vacuum sid...
Rotary Valves
Pelletron Rotary valves are available in stainless steel or Aluminium in medium or high pressure versions which can handle pressures up to 3.5 Bar. They available in sizes from 100mm to 500mm diameter which can dispense up to 100,000 kg/hr !
Diverter Valves
Pelletron diverter valves are available in stainless steel or Aluminium in medium or high pressure versions which can handle pressures up to 3.5 Bar. They available in sizes from 75 mm to 300 mm diameter.
Pellbow - Wear Resistant Bend
The Pellbow a bend specially designed to resist wear caused by abrasive powders and granules. The bend generates a slowly moving pocket of material in the bend protecting the bend from impact from particles with high velocities vastly reducing the wear on the bend. The pocket of material is complete...
Pelletron DeDusters - Overview
Pelletron DeDusters use a magnetic flux field to disrupt the electrostatic charge between contaminants and pellets, and a patented air wash deck to separate and remove contaminants. Applications Plastics Industry - Cleaning of granules prior to packaging or discharge to tanker for tra...
FineAlyzer - Wet Test Analysis of Fines and Dust Particles on Plastic Pellets
WHY A NEW WET TEST STANDARD? Plastics Manufacturers need a reliable wet test method to determine the fines and dust content in plastic pellets. Plastics Processors’ increasing quality demands for resins with low fine content forced the plastic manufacturers to improve the quality of their r...
Mid, Max and XP Series DeDuster®
Dust and streamers are produced during pneumatic conveying. In dilute phase systems the hig conveying speeds produce large quanties of dust and streamers. In dense phase systems the problem is different, streamers are eliminated but the high degree of friction produces fine dust. In both cases these...
P-Series DeDusters
Pelletron P-Series DeDusters are intended for use for use directly on the throat of the processing machine or in small throughput central applications. There are two models in the Series, the P1 which is suitable for use in applications with throughputs upto 70 kg/hr, and the P5 which can process...
RC-Series DeDuster®
The new CentraCone™ DeDuster® was designed to supersede the successful P1 and P5 series. The new design has the same low height as the P1 of ~300mm, but can also clean the P5 capacities of ~250kg/h How it works The well-proven electromagnetic coil feature remains unchanged. The...